Bumper stickers

Horn broken, watch for finger.

Posted: at 23-08-2008 10:38 PM (15 years ago) | Addicted Hero

overtakers, see you at the cemetery

---

Posted: at 27-08-2008 03:08 PM (15 years ago) | Gistmaniac

 

Posted: at 30-08-2008 12:24 AM (15 years ago) | Addicted Hero

if you don't like my driving, blame the car, it's got a mind of its own

---

Posted: at 7-09-2008 04:12 PM (15 years ago) | Gistmaniac

The best printer for vinyl stickers is the Prusa i3 MK2. This printer is a fully open-source design, so you can modify every component yourself. The frame is made of a combination of aluminum and steel, while the bed rests on four high-quality stainless steel ball bearings. The build volume is good enough to print most products and it has an excellent print quality.

The firmware is easy to understand, but there are no special instructions for setting up the printer for vinyl sticker printing. You will need to learn about the design details of the Prusa i3 MK2 before you start printing your own stickers.

The Prusa i3 MK2 has an aluminum frame with a maximum build volume of 5×5 inches (13×13 cm). It also comes with a heated bed and extruder head that can handle materials up to 0.06 inch thick (.16 cm). This means that you can use this vinyl sticker printer to create large pieces of art or even small objects like keychains or badges.

The build volume of this printer is large enough to accommodate most projects and it provides enough space for its fans to blow air into the chamber through slots in its side panels.

---

Posted: at 22-08-2022 10:24 AM (1 year ago) | Newbie